iPhone dropped into water, got wet, got rained on 2024. It said there was liquid while plugged in to the charger. Basic fix in 4 steps
One of the accidents that can happen is when your phone gets wet. Even though most mobile phones are waterproof, But you may encounter problems when plugging in the charger cable. For example, on the iPhone itself, there will be a message saying that liquid has been detected. and cut off the power supply Makes it impossible to charge at all Especially during hot weather like this. Many of you probably find water-related activities to cool off. Whether it’s going to the swimming pool or go diving Playing in the sea, etc. The important thing is during the recent Songkran festival. Questions about mobile phones getting wet There’s quite a lot coming in. In this article, we will take a look at how to fix this problem.
iPhone fell into water and got wet. How to fix it?
First of all, we need to understand the water protection capabilities of many mobile phones. current version For machines that the manufacturer states are waterproof and dustproof. Usually, it will be clearly stated on the spec page how much protection it provides against water and dust damage. By specifying an IP rating, it is generally used to write the word IP followed by two more 2 codes. The first code refers to the level of protection against damage from hard objects such as dust, contact, and the second code is Level of protection against liquid damage (This generally means clean, fresh water.) An example of writing on a mobile phone’s specs page would be IP68.
But there is another type, which is if the device is not designed to prevent damage at all, such as being dustproof but not waterproof, then the letter X will be used to replace the code for that part instead, such as IP5X, etc.
The image above shows the details of each level of damage protection. The left side is from solids (first number). The right side is from liquids (last number). For mobile phones Smartphone models that are said to be waterproof Most of the time, manufacturers will seal the device to meet IP67 or 68 standards. This means that the device can prevent damage from common dust particles in everyday life. Prevents damage from hard objects that come into contact with it. As for waterproofing It will be at a level that can be taken into the water at a certain depth. Within a period of approximately 30 minutes, at this point most manufacturers will specify how much. For example, in the case of the iPhone 15 Pro and Pro Max, it is IP68. It can be used to dive to a maximum depth of 6 meters for a period of 30 minutes. consecutive minutes, etc. for this issue It is recommended that you check the waterproof specifications from the manufacturer completely first.
However, even though the mobile phone is waterproof from the factory But after using it for a period of time The waterproof seal of the unit may also deteriorate over time. Including the liquid itself if it’s not clean water. It may affect the machine as well. For example, if dipped in sweet water Then the seal around the machine began to deteriorate. If not thoroughly cleaned There may also be sugar stains on the circuit board inside the machine. Just like seawater, salt stains may remain.
Another point where water can interfere with use. Even though it is a waterproof mobile phone, that is the charging port area. Most manufacturers choose to not include a cover for the charging port like before. It is believed that the main reason is for convenience of use in normal situations. That means you don’t have to open and close the cover every time you charge the battery. In exchange for reduced water protection ability Because the average person probably wouldn’t expose their cell phone to water without protective equipment almost every day.
In fact, the circuit of the waterproof mobile charging port is already designed to have a certain level of safety. Makes the machine able to be exposed to water. Just make sure the device and charging port are completely dry before charging. For the case of iPhone If the user plugs in the charging cable Then the system detected that there was water in the charging port. The system will have a warning message that liquid has been detected. or not ready to charge Whether it’s a model that uses a Lightning or USB-C port.
If you encounter a warning message like the one above, don’t be alarmed. Here’s what you should do in order, based on information from the Apple web page:
1. Quickly disconnect the charging cable.
When plugging the charger into the iPhone and found the message that liquid has been detected as above. Quickly disconnect the charging cable immediately. Part of this is to prevent damage that may occur. Another part is to plug in the cable. There will be no power supplied to the machine anyway.
2. Make the device/charging port completely dry first.
The next step is to make the machine. Especially the charging port is completely dry. The best way, and the method Apple recommends, is to try “knocking the iPhone lightly on the palm of your hand” with the charging port facing down on the floor. for the machine to drain the water and let the water that remains in various spots come out as much as possible Then leave the machine in a dry area. Have ventilation for half an hour to allow the water to evaporate on its own. It’s even better if it’s in an air-conditioned room where the air is dry. To help water evaporate more quickly. (But if it’s the weather in Thailand right now It is expected that in a few minutes it will be completely dry.) In the meantime Do not use the machine yet. Do not plug in the charging cable at all.
Methods that are strictly forbidden To dry your mobile phone
2.1 Soak the mobile phone in rice.
It’s a classic method for wetting objects. It dries quickly and is relatively safe. But for mobile phones with delicate circuit boards And there may be small nooks and crannies along the machine. This method is not recommended at all, and even Apple recently issued an update to advise against this method. Because there may be various debris or dust in the rice that can damage the machine.
2.2 Use strong wind to blow away water.
Avoid using air blowers. Turning on the fan Or, the most powerful thing is to use a blower to blow away the water in your phone. This is because the high-pressure air may cause water to penetrate into the small openings of the machine. which may cause even more damage to the device than before.
2.3 Use a higher level of heat than normal.
In this case, it means exposing the mobile phone to heat that is higher than normal conditions, such as baking it in a microwave. Place it near a heat source. Or put it in the sun in Thailand during April. Because the high heat may cause other equipment in the machine to deteriorate as well. Especially those with adhesive seals around the machine. Including various glass that may be damaged when exposed to high heat. If it’s a microwave, it’s even harder. Strictly prohibited
2.4 Use a foreign object to poke into the charging port.
For example, stuffing a cloth, tissue, or cotton swab into the charging port to absorb water. Because it may damage the contacts in the charging port. In particular, the Lightning connector will be an open hole, unlike USB-C, which will have a long spur in the middle to protect it. But if you want to absorb water It is recommended that you just use a cloth or tissue to blot from the outside. No need to poke into the port.
3. Try plugging in the charger again.
After leaving the machine alone for about half an hour. Try plugging in the charger again. It should now be able to charge normally. But if you still see a warning message that liquid has been detected. You may have to unplug the charger and leave it behind again. For confidence, you may leave the device unused for 1 full day.
4. Try charging again.
Coming to this step If the device doesn’t show any abnormalities, it should be able to be used and charged. But if the same problem still exists This time, maybe try changing to a different charging cable. You should also try restarting your iPhone once to allow the system to clear the settings. Clear out some RAM. Because sometimes it can be caused by a software glitch as well.
If in the end you still cannot charge your iPhone or any mobile phone, you should take the device to a service center for inspection and problem resolution. This can happen even after the water has dried up. Because it may be unclean water. As a result, when dry, there will still be dust, salt, and sugar stains on the circuit board and cause the machine to malfunction. If you’re lucky, just unpack the machine and clean the circuit board. But if you’re unlucky, you might even change the board.
Plus – how to remove water from speakers
Another point of mobile phones that often gets stuck in water is the speaker grille. In general, you can use a cloth or cotton swab to absorb some of the water. But if you want to expel water in small crevices, it usually relies on sound waves to expel water. The Apple Watch itself already has this function built into watchOS. As for the iPhone, it doesn’t yet exist, but we can find it and use it. Work can be done as well.
Before use, you must warn that if you will use this method with headphones. Should be used only while removing the headphones. Because the sound has a very high frequency. May cause harm to the auditory nerve.
Sonic App
For iPhone users You can download a free app called Sonic | Tone Generator from the App Store. The app has a button that allows users to select a sound frequency level up to 25,000 Hz and a button to play the sound at that frequency through speakers or ears. Listen to what you want. To be used to dislodge water that is stuck on the grill. As for the Android side, there are similar apps, such as the Sound Wave Tone Generator app, etc.
Fix My Speakers website
If you don’t want to install the app on your device There are websites that can be used as substitutes, such as the Fix My Speakers website. When you enter, there will only be a single white button as shown in the picture above. When pressed, it will immediately play high-frequency sound to speakers or headphones. If you want to stop, just press the same button. There are also several apps and websites that can be used to remove water from your phone’s speakers. Who is using which one? Please leave a comment below.
Summary of fixes for iPhone Notified that liquid was detected
The first thing is to quickly disconnect the charging cable first. Followed by wiping and cleaning the outside of the machine to dry first. Then leave the machine in a dry, well-ventilated area for at least half an hour. Then try plugging in the charger again. If it still doesn’t go away, leave it alone for a day and then try again. What you shouldn’t do is soak your mobile phone in rice. Including using an object to poke into the charging port to absorb water. Because it may cause additional damage.
But if in the end it still charges the iPhone or can’t use a mobile phone anymore You should take the device to a service center to fix the problem. Because it may require unpacking the device to clean it at the circuit board level.
Tags: iPhone reports liquid detection plugging charger cable falling water wet Fix steps
-
